Powered Ascender PESCO Smart Spider PSJ 120-20：14MM special rope
07/29/2024Powered Ascender PESCO Smart Spider PSJ 120-20: The Source of Powerful Power
08/12/2024
- Inspection of the Rope Climbing Machine Components:
Before commencing any operation, it is of utmost importance to conduct a meticulous examination of both the shell and the rope of the rope climbing machine. Please make sure that there are no signs of damage, cracks, or wear and tear on the shell. Simultaneously, inspect the rope for any fraying, kinks, or weakened sections. Such a detailed inspection helps to guarantee the integrity and safety of the equipment throughout the operation. For instance, if the shell is cracked, it could compromise the structural stability of the machine, and a frayed rope might snap under tension, leading to potentially dangerous situations.
- Power Switch Activation and Verification:
Turn on the power switch and carry out a careful assessment to ensure that the power supply and voltage are adequate. Insufficient power or unstable voltage can cause the rope-climbing machine to malfunction or operate erratically. For example, if the voltage is too low, the machine might not be able to reach the desired ascent or descent speed, or it could stop working altogether mid-operation.
- Securing of High-Altitude Ropes:
Before putting the rope climbing machine into use, it is essential to guarantee that the high-altitude ropes are firmly and securely fastened. This involves double-checking the anchor points and ensuring that the ropes are properly tensioned and free from any slack. A loose or improperly fixed rope could result in the rope climbing machine losing its grip and causing a dangerous fall.
- Release of the Emergency Stop Switch:
If the emergency stop switch has been engaged (perhaps due to a previous alarm or safety precaution), release it in a clockwise direction. However, it is very important to note that if the machine alarm is activated, releasing the emergency stop switch should only be done after identifying and addressing the cause of the alarm. This ensures that the operation proceeds safely without ignoring any potential safety hazards.
- Rope Ingress Procedure:
Could you place the rope into the rope entry port and press the up button? The rope will then automatically complete the rope entry process. It is strictly prohibited to insert the rope through the rope outlet, as this could cause mechanical damage and operational failure. For instance, inserting the rope in the wrong port might jam the machinery or cause the rope to become tangled, resulting in a delay or even an accident.
- Attachment of Items:
Connect the items to the hanging hook using a D-shaped buckle. Ensure that the connection is secure and that the items are balanced and properly positioned to prevent any shifting or imbalance during the ascent or descent.
- Operation via Handheld Remote Control:
As per the requirements, press the handheld remote control to raise or lower the rope climbing machine. Once the hand is released, the power will automatically be cut off and the brakes will engage to ensure the safety of the hanging objects in mid-air. This feature provides an added layer of safety and control during the operation.
